The following links will direct you to product-specific information on the manufacturers website. We will attempt to keep all information current as it is made available by our manufacturers. If you do not find the product you are looking for, please contact us so one of our sales engineers can assist you.
EDM Sinker Products
| EA8 | The Mitsubishi EA8 features 64-bit PC-based CNC control with a 10.4 inch TFT LCD screen for faster data processing and servo control. It also features E.S.P.E.R. for step-by-step programming and a high-speed jump (up to 10 meters per minute) that allows no flush burning.
|
| EA8PV Advance | The Mitsubishi EA8PV Advance features the new M700 series control with 15” touch screen and FP80V energy saving power supply, reducing electrical consumption by 20% as compared to the previous FP model. The combination of the standard granite table and NP2 circuit provides fine satin surface finishing anywhere on the table surface.
|
| EA12D | The Mitsubishi EA12D features 64-bit PC-based CNC control with a 10.4 inch TFT LCD screen for faster data processing and servo control. It also features E.S.P.E.R. for step-by-step programming and a high-speed jump (up to 10 meters per minute) that allows no flush burning.
|
| EA12V Advance | Mitsubishi redefines accuracy and productivity with the new EA12V Advance die sinking EDM. Featuring the new M700 series control with15” touch screen, makes these machines even more user-friendly than previous models. One of the most obvious and attractive features of the EA12V Advance is the space-saving design. Compared with conventional models, required floor space has been reduced by nearly 20%.
|
| EA28V Advance | The Mitsubishi EA28V Advance features the new M700 series control with 15” touch screen and FP120V energy saving power supply, reducing electrical consumption by 20% as compared to the previous FP model. High-speed machining of tungsten carbide with copper tungsten electrode is now possible with the standard V-series Power Supply and electrode wear can be reduced by as much as 50% when machining tungsten carbide.
|
| EA30E | The Mitsubishi EA30E features a 64-bit, PC-based CNC Control that enables faster data processing and servo control plus E.S.P.E.R. for step-by-step programming and high-speed jump (up to 10 meters per minute) that allows no flush burning.
|
| Gantry 800 | The OPS Ingersoll Gantry 800 features a 64-bit, PC-based CNC Control that enables faster data processing and servo control while its unique construction provides thermal stability and rigidity. The Gantry 800 also features a unique 4 sided drop tank design that allows work area access from all sides.
|
| Gantry 1200 | The OPS Ingersoll Gantry 1200 features a 64-bit, PC-based CNC Control that enables faster data processing and servo control while its unique construction provides thermal stability and rigidity.
|
| Ganry 1500 | The OPS Ingersoll Gantry 1500 features a 64-bit, PC-based CNC Control that enables faster data processing and servo control while its unique construction provides thermal stability and rigidity. The Gantry 1500 also features a unique 4-sided drop tank design that allows work area access from all sides.
|
| Gantry 2000 | The OPS Ingersoll Gantry 2000 features a 64-bit, PC-based CNC Control that enables faster data processing and servo control while its unique construction provides thermal stability and rigidity. The Gantry 2000 also features a unique 4-sided drop tank design that allows work area access from all sides. |